Product Summary

The AM29F040B-70JC is a 4 Mbit, 5.0 volt-only Flash memory organized as 524,288 Kbytes of 8 bits each. The 512 Kbytes of data are divided into eight sectors of 64 Kbytes each for flexible erase capability. The AM29F040B-70JC is offered in 32-pin PLCC, TSOP, and PDIP packages. This device is designed to be programmed in-system with the standard system 5.0 volt VCC supply. A 12.0 volt VPP is not required for write or erase operations. The device can also be programmed in standard EPROM programmers.

Parametrics

AM29F040B-70JC maximum ratings: (1)Storage Temperature:Plastic Packages, –65℃ to +125℃; (2)Ambient Temperature with Power Applied: –55℃ to +125℃; (3)Voltage with Respect to Ground: VCC (Note 1), –2.0 V to 7.0 V; (4)A9 (Note 2): –2.0 V to 12.5 V; (5)All other pins (Note 1): –2.0 V to 7.0 V; (6)Output Short Circuit Current (Note 3): 200 mA.

Features

AM29F040B-70JC features: (1)Compatible with Voltage or Current Mode Topologies; (2)Practical Operation Switching Frequencies to 1MHz; (3)50ns Propagation Delay to Output; (4)High Current Dual Totem Pole Outputs(1.5A Peak); (5)Wide Bandwidth Error Amplifier; (6)Fully Latched Logic with Double Pulse Suppression; (7)Pulse-by-Pulse Current Limiting; (8)Soft Start / Max. Duty Cycle Control; (9)Under-Voltage Lockout with Hysteresis; (10)Low Start Up Current (1.1mA).

Diagrams

AM29114
AM29114

Other


Data Sheet

Negotiable 
AM29114DC
AM29114DC

Other


Data Sheet

Negotiable 
AM29117GC
AM29117GC

Other


Data Sheet

Negotiable 
AM29118DCB
AM29118DCB

Other


Data Sheet

Negotiable 
AM2911APC
AM2911APC

Other


Data Sheet

Negotiable 
Am2922
Am2922

Other


Data Sheet

Negotiable